Transport, storage and disposalNL
17.1 Emergency release
6.Remove the hoses.
Unlock door
18.2 Install transport protection
devices
Required:The drain pump is empty.
→
Page 36
To avoid transport damage, secure
the device with transport protection
before transport.
1.Remove the 4 cover caps using a
screwdriver.
1. ATTENTION!Running water can
lead to material damage.
▶ Do not open the door if water is
visible behind the glass.
Pull the emergency release
downwards with the aid of a tool
and release.
Save the covers.
2.Install the 4 transport protection
devices.
→
"Remove transport protection",
page 14
aThe door lock is unlocked.
2.Insert the service cover and click
into place.
3.Close the service cover.
18.3 Restarting the device
18 Transporting,
hit and throw
▶ For more information, see
→
"Setup and connection",
page 13
and
→
"Start wash cycle without
laundry", Page 20
.
18.1 Disassemble the device
1.Close the tap.
2.Empty the water supply hose.
3.Turn off the device.
→
"Switch off the appliance",
page 33
4.Unplug the device
plug socket.
5.Leave the soap
→
"Drain pump
clean Page 36
walk away.
igen",
49
To Next Page
Loading...
