Set up and connectNL
remain on the device. The stains
disappear after the first wash.
4 Set up and connect
4.1 Unpack the device
The delivery consists of: ¡
Washing machine
¡Accompanying documents ¡
Transport protections
→
"Remove transport protection",
page 14
¡Cover caps
¡Water supply hose
→
"Connect the water supply hose",
page 15
PAY ATTENTION!
Objects left in the drum that are not
intended for the use of the appliance
can lead to material and appliance
damage.
▶ Remove all these objects and the
supplied accessories from the drum
before use.
4.3 Installation site
requirements
1.Completely remove packaging
material and protection from the
device.
→
"Disposing of the packaging",
page 12
WARNING
Risk of electric shock!
The device contains live parts.
Touching live parts is dangerous.
▶ Do not use the device without a
cover plate.
2.Check the device for visible
damage.
3.Open the door.
4.Remove the accessories from the
drum.
5.Close the door.
WARNING
Risk of injury!
When used on a plinth, the device can
tip over.
▶ The device feet for commissioning
on a plinth must always be fitted
with the fixings
→
Page 29
confirmation from the
manufacturer.
4.2 Package Contents
After unpacking, check all parts for
transport damage and the
completeness of the delivery.
PAY ATTENTION!
Use with incomplete or defective
accessories may impair the operation
of the device or cause material
damage and damage to the device.
▶ Do not use the device with
incomplete or defective accessories.
▶ Replace accessories before using
the device.
→
"Accessories", page 29
PAY ATTENTION!
Freezing residual water in the device
can damage the device.
▶ Do not place and use the device in
frost-sensitive places or outdoors.
If the device is tilted more than 40°,
residual water can escape from the
device and cause material damage.
▶ Carefully tilt the device.
Remark:The device has been checked
at the factory for correct operation.
Water stains can enter
13
To Next Page
Loading...
