EasyManua.ls Logo

Siemens WU14UT20NL - Changing Basic Settings; Cleaning and Maintenance; Cleaning Drum; Cleaning the Detergent Drawer

Siemens WU14UT20NL
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and maintenanceNL
15.2 Change basic settings
16 Cleaning and maintenance
loves
1.Set the program selector to
position 1.
Carefully clean and maintain your
device to ensure that it continues to
function well for a long time.
16.1 Cleaning drum
CAREFULLY
Risk of injury!
Permanent washing at low
temperatures and lack of ventilation
of the appliance can damage the
drum and cause injuries.
Regularly run a drum cleaning
program or wash at temperatures
of at least 60°C.
Allow the appliance to dry with the
door and detergent drawer open
after each use.
2.PressStart/Refilland at the same
time turn the program selector to
position 2.
aThe display shows the current
the on.
3.Set the program selector to the
desired position.
4.PressReady in for the value
to change.
The programClean drum run
without laundry with powder
detergent.
5.Turn off the device to save the
change.
16.2 Cleaning the detergent
drawer
1.Pull out the detergent drawer.
2.Press the insert down and remove
the detergent drawer.
35

Table of Contents

Related product manuals