Operating the appliance en
11
1 Operating the
appliance
Operating the appliance
Prepare the appliance
The washing machine was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum clean programme.
Before washing for the first time
~ Page 33
Notes
■ Never switch on a damaged
machine!
■ Inform customer service!
1. Insert mains plug.
:Warning
Danger of death from electric
shock!
Danger of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
2. Turn the tap on.
3. Open the washing machine door.
Adjusting the washing
programme
Turn the programme selector to the
desired programme (eg. Conttons
programme). Presettings and maximum
load are indicated in the display field.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the presettings or selecting
additional options.
Notes
■ Options are retained when the
appliance is switched off and can be
selected, deselected or changed
depending on the progress of the
programme.
■ All buttons are sensitive, they only
need to be touched gently. If the
button 煻爮 (Spin) 0, 窓悵 (Finish in)
5 time is held down, the setting
options are automatically scrolled
through.
To Next Page
Loading...
