Getting to know your appliance en
9
Control panel
Display symbols
+
#
Note: All buttons are sensitive, they only need to be touched gently.
( Select a programme. Rotating the programme
selector in either direction is possible.
Programme Overview
~ Page 15
Change programme settings of the selected
programme and select programme options:
0 Select 倸䂵(Temperature) °C, 煻爮(Spin)
0, 窓悵 (Finish in) û buttons and change.
8 Select 㒯爮 / 撑挌 (speed/eco), 熊䦍厷
(Less iron), 㒯儑伦 (Rinse plus) button.
@ Start wash programme. Select 䄏㯚 / 䲦朎
(Start/Reload) I button to start, interrupt
(e.g. reload washing) and cancel the
programme.
H Switch off the appliance. Set Programme
selector to $ Off.
Programme progress symbols
x Washing: On if the washing cycle is running.
¬ Rinse: On if the rinse cycle is running.
0 Spin: On if the spin cycle is active.
Programme information symbols
90°C, 1000 0, 6.2kg*: Temperature, spin speed, max.
load for selected programme.
1:30*: Programme remaining time.
w Childproof lock: On if childproof lock is activated.
Activate/deactivate the childproof lock.
v Door unlocked: On if door can not be opened.
| Tap: Flashing if tap was not opened or no water sup-
ply; On if the water pressure was low.
o Overdosage: On if too much detergent used.
- - - - : Power consumption.
To Next Page
Loading...
