54
Figure 4-36
In X328H328H328HFigure 4-33, click page switch button, the interface is shown as in Figure 4-37.
Here you can activate the following functions:
z Preset
z Tour
z Pattern
z Auto scan
z Auto pan
z Flip
z Reset
z Page switch
Figure 4-37
Note:
z Preset, tour and pattern all need the value to be the control parameter. You can define it as
you require.
z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it
can be used for special process.
z The following setups are usually operated in the
X328H328H328H Figure 4-33, Figure 4-36 and Figure 4-37.
4.9.1Preset Setup
In Figure 4-33, please use eight direction arrows to adjust camera to the proper position.
In Figure 4-36
X, click preset button and input preset number. The interface is shown as in Figure
4-38
Now you can add this preset to one tour.
To Next Page
Loading...
