Human-machine interface and its operation
Ser Port. /tyCo/01
Baudrate 09600
Tip; Modi need Manual reboot
Figure 17 CSC-1321 serial port channel parameter display interface
Move the cursor to the serial port number, and press the up or down keys to
modify its number. In a serial port module, its serial number can be chosen
from 1 to 6.
Move the cursor to the baud rate, and press the up or down key to change its
value.
Then, press SET to confirm your modification.
◆
Ethernet TCP server configuration
Interface of the Ethernet TCP server configuration is shown as follows:
[2-2-1-1] 1/1
Rem IP 192.188.110.001
Mon port 2040
Tip; Modi need Manual reboot
Figure 18 CSC-1321 Ethernet TCP server channel parameter display interface
Move the cursor to the remote IP address, and press the up or down key to
change its IP address.
Move the cursor to the monitoring port, and press the up or down key to
change port number.
Then, press SET to confirm your modification.
◆
Ethernet TCP client configuration
Interface of the Ethernet TCP client configuration is shown as follows:
[2-2-3-1] 1/1
To Next Page
Loading...