This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without prior
written consent. © Siklu Communication Ltd 2021 All rights reserved.
1. Introduction
1.1 Scope
This document describes how to install, configure, operate and maintain the MultiHaul™ TG, Siklu’s Wireless
60 GHz L2 SDN Mesh for Multi-Gigabit Ethernet.
1.2 Applicable Products and Releases
•
MultiHaul™ TG Node N366
•
MultiHaul™ TG Terminal Unit (TU) T265
•
MultiHaul™ TG Software MH-TG-1.0
1.3 Audience
This document assumes a working knowledge of wireless connectivity platforms and their operating
environments.
This document is intended for use by persons involved in planning, installing, configuring, and using the
MultiHaul™ TG units.
1.4 Conventions
The following conventions are used in this document in order to make locating, reading, and using information
easier.
Warning: Warns you that if you do not proceed as instructed, personal injury or loss of
life could result.
Caution: Informs you that if you do not proceed as instructed, damage to or
destruction of equipment, loss of functionality, or a health hazard to personnel may
result.
Note: Informs you of an optional activity that may be performed at this stage.
To Next Page
Loading...
