This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without prior
written consent. © Siklu Communication Ltd 2021 All rights reserved.
4. Installing the MultiHaul™ TG Units
4.6 Mounting the MultiHaul™ TG Node on a Wall
The node can be mounted on a wall using the AX-MK-WM accessory and four wall-mount screws (not provided),
as shown in the following figure:
Order the AX-MK-WM accessory separately from Siklu or your reseller.
To Next Page
Loading...
