Getting Started with Silhouette Alta®
4
Nvgo Tb
There is a panel on the right-hand side that shows the following tabs:
Design
This design area is your workspace to create projects.
This area houses the toolbars, the design space, and
the gray holding area. When you are in the 3D Print
or the Store tab, click the Design tab to return to your
design page.
Store
When you are connected to the internet, the Store tab
takes you to the Silhouette Design Store where you
can browse and purchase designs.
3D Print
The 3D Print tab allows you to adjust the print settings
for your designs and send them to your Alta.
To Next Page
Loading...
