Silver Peak Hardware Reference Guide
Copyright © September 2018 by Silver Peak Systems, Inc. All rights reserved
34
Replacing a Deployed Appliance
The following bullets summarize information about using Appliance Manager or Orchestrator when replacing an
appliance that's already deployed in your network:
If you’ve made a backup of the appliance configuration, you’ll be able to restore it to the new appliance. If
not, you must manually configure the new appliance.
To manually configure the appliance, refer to the following user documents:
Silver Peak Appliance Manager Operator’s Guide
[200030-001]
Silver Peak Unity Orchestrator User’s Guide
[200095-001]
If you’re replacing a 4-port appliance and want to restore the backup configuration, then make sure that the
new appliance is also a 4-port appliance.
To Next Page
Loading...
