Silver Peak Hardware Reference Guide
Copyright © September 2018 by Silver Peak Systems, Inc. All rights reserved
74
Pluggable Transceivers in EdgeConnect
Silver Peak offers dual-rate 1/10G optical SFP+ transceivers for operation within certain EdgeConnect appliances.
These transceivers go through an internal qualification process and are customized for operations with Silver Peak
software. Silver Peak recommends these transceivers for use with EdgeConnect appliances that support pluggable
transceivers.
Silver Peak Approved Transceivers
Vendor Model Part Number
Finisar SFP+ SRD (Dual Rate: 10GBase-SR, 1000Base-SX) FTLX8574D3BCVSPK
Finisar SFP+ LRD (Dual Rate: 10GBase-SR, 1000Base-LX) FTLX1471D3BCVSPK
However, in situations where usage of non-Silver Peak transceivers is required, EdgeConnect will not inhibit the
3rd party transceivers from operating but may not provide full visibility or monitoring capabilities for these
transceivers. Such transceivers will be reported as “not supported” and alarms may not be reported properly.
The following is a list of 3rd party transceivers that are validated and qualified to operate within EdgeConnect, but
which are not fully supported:
Silicom Approved Transceivers
Vendor Model Part Number
Avago SFP+ LRD (Dual Rate: 10GBase-SR, 1000Base-LX) AFBR-709DMZ
Finisar SFP+ SRD (Dual Rate: 10GBase-SR, 1000Base-SX)
FTLX8571D3BCV
FTLX8574D3BCV
Finisar SFP+ LRD (Dual Rate: 10GBase-SR, 1000Base-LX) FTLX1471D3BCV
Finisar SFP+ 10GBase-SR* FTLX8571D3BCV
Finisar SFP+ 10GBase-LR* FTLX1471D3BCV
Finisar SFP 1000Base-SX FTLF8519P2BCL
Finisar SFP 1000Base-LX FTRJ1319P1BTL
Finisar SFP 10/100/1000Base-T (Copper) FCLF8522P2BTL
Intel Approved Transceivers
Vendor Model Part Number
SR modules
Intel DUAL RATE 1G/10G SFP+ SR (bailed) FTLX8571D3BCV-
IT
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDZ-
IN2
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDDZ-
IN1
LR Modules
Intel DUAL RATE 1G/10G SFP+ LR (bailed) FTLX1471D3BCV-
IT
To Next Page
Loading...