Silvercrest SAB 160 A1 - Device Installation Procedures; Connection and ISO Configuration

9
Installation
SAB 160 A1
GB
CY
Installation
WARNING
With the installation of the device damage can occur!
► If possible have the device installed by a qualifi ed technician.
► If you want to install the device yourself, for safe and fl awless operation of
the device follow the instructions for connection and installation.
Connection
IMPORTANT
The use of incorrect connections can lead to damage to the
device.
► For installation use the device's ISO connections. The vehicle specifi c ISO
adapter that you may possibly require can be obtained from a specialist
establishment, from a local dealer or from the store's technical department.
When using other connection types the warranty becomes void!
Confi guration of the ISO connections
The view of the plug connector is from behind.
1357
2468
ISO A (power
supply confi -
guration)
Confi guration
1 unconfi gured
2 unconfi gured
3 unconfi gured
4 Permanent positive 12 V (Tc. 30)
5 Antenna power
6 unconfi gured
7
Ignition circuit positive 12 V
(Tc. 15)
8 Negtative (-) chassis (Tc. 31)
1357
2468
ISO B (spea-
ker connection
confi guration)
Confi guration
1 Rear right +
2 Rear right -
3 Front right +
4 Front right -
5 Front left +
6 Front left -
7 Rear left +
8 Rear left -
IB_90468_SAB160A1_LB7.indb 9IB_90468_SAB160A1_LB7.indb 9 28.06.13 13:3828.06.13 13:38