Silvercrest SDBS 2400 B2 - Setup and Connection; Package Contents and Inspection; Unpacking Instructions; Set-up Location Requirements

SDBS 2400 B2
GB
│
IE
│
NI
│
CY
│
9 ■
Setting up and connecting
Package contents and transport inspection
The appliance is supplied with the following components as a standard:
● Steam Generator Iron
● Velcro tape for fastening the power cable
● Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defec-
tive packaging or during transport, contact the Service hotline (see section
Service).
Unpacking
WARNING
Risk of suffocation!
► Do not allow children to play with packaging materials.
There is a risk of suffocation.
♦ Remove all parts of the appliance and the operating instructions from the
box.
♦ Remove all packaging material.
Requirements for the set-up location
The surface on which you set up the base station q must be stable, level and
heat resistant.