Why is the crema too light in my Silvercrest SEM 1100 B3?
If the crema is too light and the espresso runs out of the sieve holder quickly, it could be due to not enough espresso powder, so use more espresso powder. Another reason may be that the espresso powder is too coarsely ground; use only espresso powder specially manufactured for espresso.
What to do if the espresso is cold from my Silvercrest Coffee Maker?
If the espresso is cold, it could be due to a few reasons. First, preheat the appliance. Second, wait until the green heating-up control lamp lights up. Lastly, pre-warm the cups.
Why is my Silvercrest SEM 1100 B3 Coffee Maker pump unusually noisy?
An unusually noisy pump is likely due to an empty water tank. Fill the water tank with water.
What to do if espresso no longer flows out of my Silvercrest SEM 1100 B3 Coffee Maker?
If the espresso no longer flows out, it might be due to several reasons. The espresso powder may be too moist or compressed too tightly; in this case, re-prepare the espresso without compressing the powder as firmly, and use new powder if necessary. Also, ensure that the water tank is filled with water. Finally, the holes of the sieve holder openings could be blocked, so clean the sieve holder.
How to fix milk frothing problem on Silvercrest SEM 1100 B3?
If the milk does not froth in your Silvercrest Coffee Maker, it could be that the milk is not cold enough; use milk from the refrigerator. Another possible cause is that the milk frother is dirty, so clean the milk frother.
Why is my Silvercrest SEM 1100 B3 Coffee Maker pump so noisy?
If the pump of your Silvercrest Coffee Maker is unusually noisy, the water tank might be empty. Fill the water tank with water.
How to fix Silvercrest Coffee Maker when milk does not froth?
If the milk does not froth in your Silvercrest Coffee Maker, the milk might not be cold enough; use milk from the refrigerator. Alternatively, the milk frother might be dirty, so clean it.
Why milk does not froth in Silvercrest SEM 1100 B3 Coffee Maker?
If the milk does not froth in your Silvercrest Coffee Maker, ensure the milk is sufficiently cold by using milk directly from the refrigerator. Also, the milk frother might be dirty; clean the milk frother.
How to fix milk frothing problem in Silvercrest SEM 1100 B3?
If the milk does not froth in your Silvercrest Coffee Maker, the milk may not be cold enough; use milk directly from the refrigerator. Also, the milk frother may be dirty; ensure you clean it.
General| Power | 1100 W |
|---|---|
| Water Tank Capacity | 1.2 L |
| Coffee Type | Ground Coffee |
| Anti-drip System | Yes |
| Type | Filter Coffee Machine |
Documentation is protected by copyright law.
Technical information corresponds to the latest version.
Use of warning notice types indicates a hazardous situation.
Warning notice indicates potential for property damage.
Product is for espresso/cappuccino and milk frothing in private households.
Check package for completeness and signs of visible damage.
Dispose of packaging in an environmentally friendly manner.
General safety warnings regarding appliance usage and children.
Never submerge appliance in water or other liquids.
Warnings about wet hands, hot parts, steam, and connections.
Warnings about replacement parts, moisture, and power cable.
Warnings against unattended operation, timers, low temperatures, outdoor use.
Repairs during warranty must be done by authorized service.
Labels for main appliance parts and accessories.
Specifications like voltage, power, and pressure.
Explains the temperature indicator and heating process.
Initial setup and cleaning steps before operating the appliance for the first time.
Notes on button functions and appliance behavior.
Instructions on how to fill the water tank correctly.
Steps to preheat the appliance after a long period or for the first time.
Steps to preheat the appliance before each use.
Detailed steps for preparing an espresso, including tamping and warnings.
Detailed steps for preparing a cappuccino, including milk frothing.
Detailed steps for frothing milk to create foam.
Advice on milk types, temperature, and froth quality.
General instructions for cleaning and maintenance.
Detailed steps for cleaning the milk frother.
Steps to clean the hot water shower.
Instructions for cleaning various accessories.
Detailed steps for descaling the appliance.
Information on how to order spare parts.
Solutions for espresso not flowing or dripping incorrectly.
Solutions for cold espresso, noisy pump, poor crema, and milk frothing.
Instructions on how to dispose of the appliance responsibly.
Details on warranty coverage and requirements.
What the warranty covers and does not cover.
Steps to follow for a warranty claim.
Contact details for service and importer information.
To Next Page