Silvercrest SHBR 560 A1 - Fresh Water Tank Filling; Water and Solution Levels

GB
│
IE
│
NI
│
9 ■
SHBR 560 A1
Filling the fresh water tank
ATTENTION! PROPERTY DAMAGE!
►
Fill the fresh water tank q only with cold to warm tap water
(up to max. 60°C) or distilled water.
Do not use boiling water.
► Never operate the appliance without water in the fresh water tank
q.
► Use only standard commercial, non-foaming floor cleaners as cleaning
agents.
Ƈ Grasp the fresh water tank
q by the gripping grooves on the side and pull it
upwards out of the appliance (see fig. 6).
Ƈ Flip the fresh water tank
q over and unscrew the lid. (see fig. 7).
Fig. 6 Fig. 7
Ƈ For small areas
(up to 25 m), fill the fresh water tank q with tap water
or distilled water up to the first fill level marking (see fig. 8).
Ƈ For small areas
(up to 25 m), fill the fresh water tank q with cleaning
solution up to the second fill level marking (see fig. 8).
Ƈ For large areas
(up to 55 m), fill the fresh water tank q with tap water
or distilled water up to the third fill level marking (see fig. 9).
Ƈ For large areas
(up to 55 m), fill the fresh water tank q with cleaning
solution up to the fourth fill level marking (see fig. 9).
IB_329835_SHBR560A1_LB6_GB-IE-NI.indb 9 09.06.2020 14:04:54