Silvercrest SHBR 560 A1 - Appliance Self-Cleaning Function; Operating the Self-Cleaning Cycle

GB
│
IE
│
NI
│
17 ■
SHBR 560 A1
Fig. 29 Fig. 30
Self-cleaning function
The appliance has a self-cleaning function that allows you to automatically clean
the rotary brush 6, the brush chamber in the foot section 3 and the suction
channel after use.
Ƈ Place the switched-off appliance on the storage tray
4 of the parking and
cleaning station (see fig. 31).
Ƈ Press the self-cleaning switch
o (see fig. 32).
Fig. 31 Fig. 32
Ƈ The following cleaning programme is started:
1. Cleaning solution is applied to the rotary brush
6 for approx. 20 seconds.
2. The rotary brush
6 is started for approx. 10 seconds while cleaning solution
is applied to the rotary brush 6.
3. The rotary brush
6 turns and the vacuum function remains active for approx.
30 seconds while cleaning solution is applied to the rotary brush
6.
4. The appliance will switch off automatically when the cleaning programme
completes.
IB_329835_SHBR560A1_LB6_GB-IE-NI.indb 17 09.06.2020 14:04:56