■ 14
│
GB
│
IE
│
NI
SHBR 560 A1
Cleaning and maintenance
RISK OF ELECTRICAL SHOCK!
► Switch the appliance off and pull out the mains plug before cleaning the
appliance!
ATTENTION! PROPERTY DAMAGE
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
NOTE
► Empty the waste water tank
2 after every use.
► After every use, carry out a self-cleaning of the appliance (see section
Self-cleaning function).
Ƈ Clean the appliance with a moist cloth or rag. For stubborn soiling use a mild
detergent on the cloth.
Cleaning the waste water tank
NOTE
► Empty the waste water tank
2 as soon as the dirty water has reached the
MAX marking.
► Once the waste water tank 2 is full, the float 8 causes the suction motor
to switch off automatically.
Ƈ Proceed as follows to empty the waste water tank
2:
1. Press the knob at the top of the waste water tank
2 downwards (see fig. 20).
Hold the handle of the waste water tank 2 while pressing the knob down-
wards.
2. Pull the waste water tank
2 forwards out of the appliance (see fig. 20).
Ƈ Pull the lid of the waste water tank
9 upwards out of the waste water tank 2
(see fig. 21).
IB_329835_SHBR560A1_LB6_GB-IE-NI.indb 14 09.06.2020 14:04:55
To Next Page
Loading...
Need help?
General
