■ 12
│
GB
│
IE
│
NI
SHBR 560 A1
Fig. 14 Fig. 15
Ƈ Hold down the cleaning solution switch
t during both forward and backward
cleaning movements with the appliance. This ensures that the cleaning solution is
applied evenly to the hard floor via the rotary brush.
NOTE
► For stubborn dirt, move the appliance over the soiled area several times
while holding down the cleaning solution switch
t.
Ƈ Press the hard floor switch r again to switch the appliance off (see fig. 13).
Cleaning carpets
NOTE
► Before using the appliance to clean a carpet, test the appliance on an
inconspicuous area of the carpet.
► Before cleaning, check the carpet manufacturer's label for special care
instructions. The appliance is not suitable for sensitive carpets (e.g. silk,
leather, flokati etc.).
Once the appliance is assembled and the fresh water tank
q is filled with water
and cleaning solution:
Ƈ Unwind the power cable
u completely from the upper and lower cable retainers
z/p. To unwind the power cable u quickly from the cable retainers z/p,
pull the upper cable retainer z out a little way and turn it downwards (see
fig. 16).
Ƈ Insert the plug into the mains power socket.
Ƈ Press the carpet switch
e to switch the appliance on (see fig. 17).
The LED on the carpet switch e lights up blue.
IB_329835_SHBR560A1_LB6_GB-IE-NI.indb 12 09.06.2020 14:04:54
To Next Page
Loading...
