Silvercrest SHFD 1400 C1 - 10. Cleaning and Maintenance; Cleaning Accessories and Interior; Cleaning the Housing; 11. Storage

87
GB
10. Cleaning
DANGER of burns!
~ Let the device cool down before moving
or cleaning it.
DANGER! Risk of electric
shock!
~ Pull out the mains plug11 from the wall
socket before cleaning the hot air fryer.
~ The hot air fryer must not be immersed
in water.
WARNING! Risk of material damage!
~ Do not clean using sharp objects or
abrasive cleaning agents.
NOTE: please note that water drops may
still be present in cavities after drying. Allow
all parts to air dry completely.
Accessories
• Remove coarse food residues.
• The frying basket 5 and screen assem-
bly
6 can be cleaned in the dishwasher.
Press the screen assembly 6 upwards out
of the frying basket5. When replacing
after cleaning, ensure that the curve of
the screen assembly6 is facing up-
wards. Press down the screen
assembly6 at the edges until it noticea-
bly clicks into place.
NOTE: you can also clean these parts by
hand with warm water and detergent. Then
rinse thoroughly with clean water.
• Soak burnt-in food leftovers beforehand.
• Clean the pan10 by hand with warm
water and detergent. Then rinse thor-
oughly with clean water.
• Let all parts dry completely before you
put them away or use the device again.
Housing
• Wipe the housing1 from the outside
with a damp cloth and a little mild de-
tergent.
• Dry with a tea towel.
Interior
1. Clean the interior with a soft sponge, a
little water and mild detergent.
2. Wipe several times with a damp mi-
crofibre cloth which you should wash
and wring out in between.
3. Dry with a tea towel.
11. Storage
• Before putting the hot air fryer away,
make sure that ...
… the mains plug11 has been pulled
out,
… the device has cooled down and
… all parts are completely dry again.
• Wind the power cable11 around the
cable spool12.
__438124_2304_B5.book Seite 87 Mittwoch, 21. Juni 2023 9:00 09