EasyManua.ls Logo

Silvercrest SKMP 1300 D3 - Items Supplied

Silvercrest SKMP 1300 D3
188 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
GB
~ Always ensure that the speed control is
set to 0 before you plug the mains plug
into the wall socket.
~
Switch the device off and pull out the
mains plug from the wall socket before
you exchange auxiliary or additional
equipment moving in operation.
~
When the blender jug is not attached, the
cover must be mounted. Otherwise the
device will not work, in order to avoid in-
juries.
WARNING! Risk of material
damage
~ Place the device exclusively on a level,
dry, non-slip and waterproof surface, so
that it can neither fall nor slip off.
~ The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
~ The device must never be operated with-
out the jug.
~ Never place the device on a hot sur-
face, e.g. a hot plate.
~ Do not change the position of the de-
vice, as long as there is still food or
dough in the device.
~ Never overfill the blender jug or mixing
bowl, since otherwise the contents could
be ejected. Overflowing liquid would
flow onto the surface. You should there-
fore place the device on a waterproof
surface.
~ Do not operate the device when it is
empty, as this causes the motor to over-
heat and may result in it becoming dam-
aged.
~ Never fill the blender jug with hot or
boiling material.
~
Only use the original accessories.
~ Do not use any astringent or abrasive
cleaning agents.
~ The beater and dough hook have a non-
stick coating. Do not damage them with
sharp, pointed or scratching objects
(e.g. knife, pot sponge).
~ The device is equipped with non-slip
plastic suction feet. As furniture is coat-
ed with a wide array of varnishes and
plastics and is also treated with different
care products, it cannot be fully ruled
out that some of these materials contain
ingredients that could attack and soften
the non-slip plastic suction feet. If neces-
sary, place a non-slip mat under the de-
vice.
4. Items supplied
1 professional food processor, base
unit17
1 splash guard18
1 mixing bowl16
1blender jug5 with:
-lid2 and
- lid of the refill opening1
- blade assembly7
-seal6
1 dough hook22
1whisk21
1 beater20
1 copy of the user instructions
__349710_711_Kuechenmaschine_B8.book Seite 34 Mittwoch, 20. Mai 2020 2:06 14

Table of Contents

Other manuals for Silvercrest SKMP 1300 D3

Related product manuals