Silvercrest SKR D1 B2 - Saving and Recalling Favorite Stations; Setting the Sleep Timer; Alarm Clock and Kitchen Timer Features

19GB/IE/NI/CY
 Checking the remaining sleep time: The interval
remaining is shown in the display.
 Cancelling the sleep timer: Press and hold
TIMER/SLEEP [9] repeatedly until Sleep off
appears in the display.
 Alarm setting
 In STANDBY or ON mode, press and hold
MENU/INFO [8] for 2 seconds.
 Turn SELECT/ENTER/SNOOZE [1] to select
<SYSTEM>.
 Push SELECT/ENTER/SNOOZE [1] to
confirm.
 Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm>.
 Push SELECT/ENTER/SNOOZE [1] to select
Alarm 1 or Alarm 2.
 Turn SELECT/ENTER/SNOOZE [1] to select
<Alarm on> or <Alarm off>.
 Push SELECT/ENTER/SNOOZE [1] to set
the hours.
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to set the minutes.
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to select the alarm duration
(options: 15/30/45/60/90 minutes).
 Push SELECT/ENTER/SNOOZE [1]
repeatedly to select the alarm sound (options:
<Buzzer>, <FM>, <DAB>).
 Push SELECT/ENTER/SNOOZE [1] to
set the alarm repetition (options: <Once>,
<Daily>, <Weekdays>, <Weekends>).
 Push SELECT/ENTER/SNOOZE [1] to select
the volume of the alarm.
 Push SELECT/ENTER/SNOOZE [1] to select
<Alarm off> or <Alarm on>.
 When the alarm is successfully set, <Saved>
appears on the display [4].
NOTES:
 When the alarm sounds, press [3] to turn
the alarm off.
 When Alarm 1 sounds, flashes on the
display [4].
 The volume gradually increases.
 After the alarm duration has elapsed,
the product will return to standby mode
automatically.
 <FM> or <DAB> alarm: When the alarm
sounds, the radio station appears on the
display [4].
 Snooze function
 In ON mode, press and hold SELECT/
ENTER/SNOOZE [1] while the alarm is
ringing. The alarm reactivates after approx.
9 minutes.
 Kitchen timer
The product has a practical kitchen timer with
which you can monitor cooking and baking times,
for example. You can set 2 kitchen timers.
 Setting and operating the
kitchen timer
 Press TIMER/SLEEP [9] to toggle between
Timer 1 and Timer 2.
 Turn VOLUME/START/RESET [7] to select
the countdown time.
 Push VOLUME/START/RESET [7] to
confirm. T1 or T2 appears on the display [4].
The countdown starts immediately.
 Press TIMER/SLEEP [9] to check the
countdown time.
 A warning signal sounds at 30, 15, 10 and
5 seconds before the countdown elapses.