Silvercrest SNM 33 C1 User Manual

US-EN 19
Sewing basics
Zigzag stitching
Turn the pattern selector dial (6) to zigzag
stitch.
The function of stitch width dial (4)
The maximum stitch width for zigzag stitch
is "5"; however, the stitch width can be
reduced on any type of stitch. The width
increases as you turn the stitch width dial
(4) from "0" to "5".
The function of stitch length dial (5)
while zigzaging
The density of zigzag stitches increases
as the setting of the stitch length dial
approaches "0". For a good zigzag stitch,
a stitch width of 2.5 or less is used.
Satin stitch
When the stitch length is set between "0"
- "1", the stitches are very close together
producing the "satin stitch" which is used
for making buttonholes and decorative
stitches.
Fine fabric
When sewing very ne fabric, place a
piece of eece under the fabric.
Zipper foot
Stitch Stitch width stitch length
2.5 1~4
The zip foot can be inserted right or left,
depending on which side of the foot you
are going to sew. (A)
To sew past the zip pull, lower the needle
into the fabric, raise the presser foot and
push the zip pull behind the presser foot.
Lower the foot and continue to sew.
It is also possible to sew in a length of
cord, into a bias strip to form a "welt". (B)
According to thickness of fabric to set
stitch length dial (5).
5 4 3 2 1 0 4 3 2 1 0.5
BA
Stitch width dial Stitch length dial

Silvercrest SNM 33 C1 Specifications

General

Brand	Silvercrest
Model	SNM 33 C1
Category	Sewing Machine
Language	English