US-EN 9
Getting ready
Connecting machine to power source
Important:
Unplug power cable when machine is not
in use.
Important:
Consult a qualied electrician if in doubt
about connecting the machine to the
power source. Unplug power cable if you
are not using the power supply.
Connect the machine to a power source
as illustrated in the adjacent drawing.
Illumination
The machine is started and the light
switched on by pressing the main switch
(20) in position " l ".
Foot pedal
The operating speed of the machine is
regulated with the pedal (t).
20
Getting ready
To Next Page
Loading...
Need help?
General
