Silvercrest SRW 2 A1 User Manual

17
SRW 2 A1
GB
IE
CY
Programming alarm times and alarm type
When programming the alarm times, you can select whether an
alarm tone should sound at the programmed time or whether the
radio should start playing. Two different alarm times (Alarm 1/Alarm 2)
can be programmed. Radio mode must be deactivated.
♦ Press the AL1/DOWN button
15
or AL2/UP button
14
. The time
flashes on the display and a point appears on the lower left
or right next to the alarm type “Alarm” (
).
♦ Press or hold the HR/− button
11
to set the hours.
♦ Press or hold the MIN/+ button
12
to set the minutes.
♦ If you wish to set the alarm type “Radio” (
), press the AL1/
DOWN button
15
or AL2/UP button
14
again. A point appears
on the lower left or right of the display next to the alarm type
“Radio” (
).
♦ Wait until the time display and the dot next to the alarm type stop
flashing to accept the setting.
NOTE
► If you want to be woken by the radio, you will also need to
select the desired station and volume as well as the alarm time.
Activating the alarm function
♦ Press the AL1/DOWN button
15
or AL2/UP button
14
briefly. In
the display a point appears to the lower left and/or right. The
alarm function is now activated.

Silvercrest SRW 2 A1 Specifications

General

Brand	Silvercrest
Model	SRW 2 A1
Category	Clock Radio
Language	English