Silvercrest SSW 400 A1 - Assembly and Operation; Assembly and Holding the Blender

■ 10 │ GB
SSW 400 A1
Assembling the hand blender
WARNING! RISK OF INJURY!
► Do not insert the plug into the mains power socket until the appliance is
fully assembled.
► The attachments - are very sharp! Handle them with great care.
NOTE
► Before first use, clean all parts as described in the chapter "Cleaning".
■ Attach the blender foot  to the hand element  so that the marking points to
the
symbol on the hand element . Turn the blender foot  until the mark-
ing on the blender foot  points to the
symbol on the hand element .
Holding the appliance
Hold the appliance as shown during operation.