EasyManua.ls Logo

Silvercrest SWKD 2400 B2 - Safety Information: Electrical Hazards; Risk of Electric Shock Precautions

Silvercrest SWKD 2400 B2
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GBIENI 3
SWKD 2400 B2
Safety information
DANGER – RISK OF ELECTRIC SHOCK!
Ensure that the base containing the electrical connections
never comes into contact with water! Allow the base to dry
completely if it accidentally becomes wet.
Use the appliance only with the supplied base.
Ensure that the power cable never becomes wet or damp
when the appliance is in use. Route the cable so that it can-
not be trapped or damaged in any way.
Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
To disconnect the appliance completely from the mains power,
the power plug must be removed from the mains socket. The
appliance should be set up in such a way that you have un-
restricted access to the mains socket at all times, and can pull
out the plug immediately in an emergency.
Check the appliance for visible external damage before use.
Do not operate an appliance that has been damaged or
dropped.
All repairs on the appliance must be carried out by autho-
rised specialist companies or Customer Service. Improper
repairs may put the user at risk. It will also invalidate any
warranty claims.
Do not allow any liquid to run over the appliance’s plug
connections.
Never immerse the appliance under water or any other
liquids! There is a risk of fatal electric shock if residual
liquids come into contact with live components during
operation.
IB_292034_SWKD2400B2_GB_IE_NI.indb 3 17.10.17 10:54

Related product manuals