Silvercrest WK 8 A2 - Initial Operation and Setup; Package Contents and Inspection

WK 8 A2
■ 12
│
GB
│
IE
│
NI
Initial operation
Package contents and transport inspection
♦ Remove all parts of the device and the operating instructions from
the box.
♦ Remove all packaging materials and the protective film from the
device.
Please check the contents of the package (see fold-out pages).
The following components are included in delivery:
▯ Game/surveillance camera WK 8 A2
▯ Wall bracket
▯ 3 x anchors
26
▯ 3 x screws
27
▯ TV cable (3.5 mm jack plug to cinch; audio/video)
28
▯ Mini USB to USB 2.0 connection cable
29
▯ Securing strap (2.5cm wide, approx. 190cm long)
30
▯ Storage box
32
▯ Adapter card (microSD to SD)
33
▯ microSDHC memory (16 GB)
34
▯ 8x1.5V type AA/Mignon/LR6 batteries
35
▯ Quick start guide
36
▯ Operating instructions
37
NOTICE
► Check the package for completeness and for signs of visible
damage.
► If the delivery is incomplete or damaged due to defective
packaging or carriage, contact the Service hotline (see the
section Service).
► You will need the following additional parts for assembling
the wall bracket: pencil, drill, 6 mm masonry drill bit, Phillips
screwdriver