Silvercrest WK 8 A2 - Troubleshooting; Fault Causes and Rectification

WK 8 A2
GB
│
IE
│
NI
│
37 ■
Troubleshooting
This section contains important information about fault identification
and rectification. Follow the instructions to avoid hazards and damage.
WARNING
Observe the following safety information to avoid hazards and
property damage:
► Repairs to electrical devices should only be carried out by
specialists trained by the manufacturer. Improper repairs can
cause considerable risks to users and damage to the device.
Fault causes and rectification
The following table will help to identify and rectify minor malfunctions:
Malfunction Possible cause Remedy
The camera does
not work.
No batteries inserted. Insert 4x1.5V AA/
Mignon/LR6 batteries
into the battery compart-
ment
11
.
The batteries are
exhausted.
Replace the batteries.
If you are unsatisfied with
the service life of the bat-
teries, insert an additional
4 x 1.5V AA/Mignon/
LR6 batteries in the bat-
tery compartment.