Silvercrest WK 8 A2 - Showing Recordings on an External Screen; Transferring Recordings to a Computer

WK 8 A2
GB
│
IE
│
NI
│
35 ■
♦ Select "Unlock current file" to remove the write protection for the
currently selected recording.
♦ Select "Unlock all files" to remove the write protection for all
saved recordings.
If you select a write-protected file, the write protection symbol
appears on the display
10
.
Showing recordings on an external screen
♦ Move the mode selector switch
13
to the TEST position.
♦ Attach the 3.5 mm jack plug on the supplied TV cable
28
to the
AV socket
19
in the camera and the cinch plugs to the audio and
video inputs on a TV set or other device. The built-in screen
10
is
disabled when the connection to an external screen is established.
Transferring recordings to a computer
♦ Connect the mini USB connector of the supplied USB cable
29
to the mini USB port
18
on the camera.
♦ Connect the USB connector to a free USB 2.0 port of a powered-
on computer. “MSDC” is shown on the camera display as soon as
the camera is connected.
This now detects the device as a "Removable Disk" and automati-
cally installs the necessary drivers. Afterwards, you can use your file
explorer to display the contents of the microSDHC memory card
34
.
Now carry out the desired file operations.