WK 8 A2
GB
│
IE
│
NI
│
15 ■
♦ Close and secure the battery compartment. Ensure that the bat-
tery compartment cover clicks firmly in place.
♦ If you are operating the device on a mains adaptor (not supplied),
open the rubber seal on the left side of the camera and insert the
plug of the AC adapter cable into the DC socket
16
. The mains
adapter must supply a direct-current voltage of 6V with at least
1.5 A. Use a barrel jack whose interior polarity is connected to
the plus pole (
).
Operation via a mains adapter is possible even with batteries
inserted. If one power source fails, operation will be maintained
using the other.
CAUTION
► When using an AC adapter, the splash water protection of the
device is no longer given.
Video connection
NOTICE
► The camera can transfer the video signal to an external monitor
or the video/audio input of a television set. Please also follow
the instructions of the respective playback device.
♦ Connect the supplied TV cable
28
to the camera’s AV socket
19
and an AV socket on a suitable external monitor.
To Next Page
Loading...
