Silvercrest WK 8 A2 - Night Mode and Brightness; Endless Capture and Battery Warning

WK 8 A2
■ 24
│
GB
│
IE
│
NI
Night mode
Select a suitable setting for photos taken in a dark environment. The
setting "Max. Range" creates sharper pictures, washes out the black
areas only slightly and generates quite a lot of noise. The setting
"Min. Blur" creates softer photos, washes out the black areas more
and generates less noise. The setting "Balanced" is preset.
Brightness
Set the photo and video lighting produced by the infrared LEDs
1
on the front of the game camera. The infrared LEDs
1
can illuminate
objects at a range of up to 20m. The further an object is from the
camera, the more light is needed. "Low brightness" is suitable for
animals that are close to the camera. "High brightness" is suitable for
animals that are further away from the camera. "Normal brightness"
is the standard preset.
Endless Capture
If the storage capacity of the microSDHC memory card
34
is full, but
you would still like to continue taking pictures or videos, select "On".
When new files are captured, the older files on the microSDHC
memory card
34
are automatically deleted. The oldest saved file is
deleted first. Afterwards, the second oldest is deleted, and so on.
Files will continue to be deleted until the new file can be saved on
the microSDHC memory card
34
. You can only overwrite files if the
mode selector switch
13
is set to the "On" position.
Battery warning
The device allows you to select whether or not you wish to be
informed when the battery capacity is almost exhausted. The default
setting is “Off”. If the function is switched on, the LED display
2
blinks red if the battery capacity is almost exhausted.