Silvercrest XL SLXL 20 A1 - Checking Speaker Battery Level; Reading Charge Level LEDs

GB
│
IE
│
NI
│
9 ■
SLXL 20 A1
Checking the charge level
You can check the charge level of the speaker using the charge level LEDs .
The speaker needs to be switched on to do this.
♦ Press and hold the button for about 3 seconds to turn the speaker on.
A rough estimate of the charge level is shown during charging by means of
the charge level LEDs :
LED display Charge level
All LEDs are on 76 ‒ 100 %
Three LEDs are on 51 ‒ 75 %
Two LEDs are on 26 ‒ 50 %
One LED is on 10 ‒ 25 %
One LED lights up orange < 10 %
All LEDs off 0 %
Using the feet
CAUTION
► Always place the speaker on a stable and level surface.
If the speaker falls, it may be damaged.
♦ For maximum stability, prop the speaker up on its two feet
.
Attaching the carrying strap
To make it easier to carry the speaker, you can attach the supplied carrying
strap to the speaker.
♦ Open the carabiners on the carrying strap
and attach them to the
brackets on the speaker.
♦ Adjust the length of the carrying strap
according to your needs.