Silvercrest XL SLXL 20 A1 - Deactivating TWS Mode; Disabling TWS Connection; Speaker Button Operations; Button Functions Overview

GB
│
IE
│
NI
│
13 ■
SLXL 20 A1
Deactivate TWS mode
♦ Briefly press the button on one of the speakers to deactivate TWS
mode. You will hear a beep and the TWS LED
goes out on both
speakers. Playback is resumed via the left speaker.
♦ Briefly press the
button on the right speaker to reactivate TWS mode.
Operation of the buttons
Button Function
► Switching on: press for 3 seconds
► Switching off: press for 3 seconds
► Increase volume: Press briefly. When you reach the
maximum volume level, you will hear a short beep.
► Next track: press for 2 seconds
► Reduce volume: press briefly
► Restart current track: press for 2 seconds
► Previous track: if the current track restarts, press again
for 2 seconds
► Play/Pause: press briefly
► Activate Bluetooth
®
function: Press briefly
(you will hear a beep)
► Disconnecting/establishing a Bluetooth
®
connection:
Press briefly to disconnect the Bluetooth
®
connection (the
device will beep). You can connect to another Bluetooth
®
device immediately.
► Activate TWS: press briefly
► Deactivate TWS: press briefly