Silvercrest XL SLXL 20 A1 - Connecting Additional Bluetooth Devices; Pairing with Other Bluetooth Devices

GB
│
IE
│
NI
│
11 ■
SLXL 20 A1
To connect further Bluetooth
®
devices, proceed as follows:
♦ Switch on the speaker and press the button . Now, the speaker is in
pairing mode and can be connected to another Bluetooth device.
NOTE
► If you do not establish a connection between the speaker and your
Bluetooth
®
device within 3 minutes, the speaker will switch off
automatically. In this case, you will have to switch the speaker back on
before restarting the pairing process.
► If the speaker stops receiving a signal while in Bluetooth
®
mode, the
speaker will switch off automatically after 10 minutes.
► The next time you turn on the speaker, it will connect automatically to the
last-connected Bluetooth
®
device. If your Bluetooth
®
device does not
reconnect to the speaker automatically, you will have to re-establish the
connection manually. A detailed description of how to do this can be found
in the operating instructions for your Bluetooth
®
device.
► If you want to connect the currently connected speaker to another Bluetooth
®
device, start by pressing the button to disconnect the currently
connected Bluetooth
®
device from the speaker. Alternatively, you can
deactivate the Bluetooth
®
function on the connected Bluetooth
®
device. You will hear a beep and the operating/charging LED will flash
alternatively orange and blue. The speaker is now ready to be paired with
another Bluetooth
®
device.