SimCom SIM28 Series User Manual

SIMCom GNSS Modules EVB kit User Guide
4.3 TTFF Test
The test configure should be set before each TTFF test. It is in the right bottom of the tool
interface.
The restart type (hot, warm or cold) could be selected in the drop down list of “Restart type”. Fill
in the next three blank (“Cycletimes” for the testing times, “Unfixtimeout” for the max time limit
of each test and “Fixedtimeout” for the time waiting before next TTFF test) and press the start
button.
Figure 16: Setting TTFF testing configuration
The result of each TTFF will be shown in the window, each TTFF shorter than the
“UnfixTimeOut” is labeled as Pass.
SIMCom GNSS Modules EVB Kit User Guide _V1.00 2014-05-20
15

SimCom SIM28 Series Specifications

General

Brand	SimCom
Model	SIM28 Series
Category	Network Hardware
Language	English