To Next PageTo Next Page
Need help?Do you have a question about the Simer 2825SS and is the answer not in the manual?
General| Type | Submersible Sump Pump |
|---|---|
| Voltage | 115 V |
| Housing Material | Stainless Steel |
| Impeller Material | Thermoplastic |
| Horsepower | 1/4 HP |
| Maximum Head | 25 feet |
| Cord Length | 10 feet |
| Switch Type | Vertical Float |
Explains safety alert symbols, signal words, and general safety practices.
Product contains chemicals known to cause cancer or reproductive harm.
Provides critical safety instructions for pump installation and operation.
Covers safe electrical connections, grounding, and voltage requirements for the pump.
Outlines SIMER's warranty period and conditions for products.
Specific instructions for returning and handling sewage pumps for warranty claims.
Details exclusions, remedies, and limitations of the product warranty.
Lists required power supply, motor duty, circuit requirements, and discharge adapter size.
Guidelines for installing shallow well jet pumps up to 25 feet deep.
Steps for safely replacing an existing shallow well jet pump.
Instructions for using Teflon tape and ensuring airtight pipe connections.
Details on suction and discharge port threading and hose adapter usage.
Instructions on how to prime the pump and prevent dry running.
Steps for filling the pump and piping with water before initial startup.
Diagnoses and corrects issues when the pump motor does not start.
Addresses causes for motor overload or failure to run properly.
Troubleshoots problems related to priming, leaks, or insufficient water supply.
Diagram illustrating the assembly of the pump with numbered parts.
Detailed list of pump parts, quantities used, and their corresponding part numbers.
