To Next PageTo Next PageWhat to do if my Simer 2935B doesn't run when water flows in?
If your Simer Water Pump isn't running when water is flowing in, here are a few things to check: * Make sure the pump is plugged into a working outlet. * Check the fuse or breaker for the outlet. * The pump impeller might be jammed. Unplug the pump and follow the maintenance procedure to clear it. * Ensure the sink stopper isn't blocking the drain.
Why is my Simer Water Pump running but not emptying the sink?
If your Simer Water Pump is running but not emptying the sink, consider the following possibilities: 1. The drain screen might be clogged. Clear it. 2. The discharge line could be clogged. Unplug the pump, open, and clear the discharge line. 3. The shut-off valve might be closed. Open it slightly. 4. The system discharge line might be too high or too long. Unplug the pump and reduce the height or length of the discharge line (11’ max. height). 5. The check valve may be installed backward. Ensure the flow arrow on the check valve points away from the pump.
How to stop my Simer 2935B from cycling on and off when there's no water in the sink?
If your Simer Water Pump is cycling on and off when there is no water in the sink, the issue might be related to the check valve. Here's what you should do: * The check valve might not be installed. Unplug the pump and install a check valve. * The check valve might be jammed. Unplug the pump, open the discharge line, and clean the check valve.
What to do if Simer 2935B cycles on and off when the sink is full?
If your Simer Water Pump cycles on and off when the sink is at maximum water flow or is full, it could be due to: * The shut-off valve not being adjusted. See Adjusting the Flow. * The shut-off valve not being installed. Unplug the pump and install a shut-off valve.
General| Brand | Simer |
|---|---|
| Model | 2935B |
| Category | Water Pump |
| Language | English |
Crucial safety warnings and instructions for safe operation and installation.
Covers pump description, specifications, and typical mounting methods.
Detailed step-by-step guide for physically installing the pump and its connections.
Instructions for plugging in, adjusting flow control valve, and using with washing machines.
Procedures for cleaning, clearing jams, and reassembling the pump.
Lists common pump symptoms, their possible causes, and recommended solutions.
Details the limited warranty period, coverage, exclusions, and claims process.
