To Next Page
T
Tami TaylorJul 26, 2025
What to do if Simer 2300 Water Pump operates but delivers little or no water?
- KKayla ToddJul 26, 2025
If your Simer Water Pump operates but isn't delivering enough water, there are several things you can try. First, remove the pump and clean both the pump and its piping. Also, remove the pump and clean the intake screen to ensure it's free of debris. Check the voltage; if it's below the recommended minimum, inspect the wiring size from the main switch. If the wiring is adequate, contact your power company or hydro authority. As a last resort, replace the pump. Additionally, turn off the pump, clean out the anti-airlock hole, and then restart the pump.
General
