EasyManua.ls Logo

Simer 2943 - User Manual

Simer 2943
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Submersible Sump Pumps
NOTICE D’UTILISATION
Pompes submersibles
pour puisard
MANUAL DEL USUARIO
Bombas sumergibles
para sumideros y efluentes
Installation/Operation/Parts
For further operating,
installation, or maintenance
assistance:
Call 800-468-7867 /
800-546-7867
English ...................... Pages 2-7
Installation/Fonctionnement/Pièces
Pour plus de renseignements
concernant l’utilisation,
l’installation ou l’entretien,
Composer le
(800) 468-7867 /
(800) 546-7867
Français ................ Pages 8-12
Instalación/Operación/Piezas
Para mayor información sobre
el funcionamiento, instalación o
mantenimiento de la bomba:
Llame al 800-468-7867 /
800-546-7867
Español ............... Paginas 13-19
©2012 SIM846 (07/16/12)
1569 0195
1572 0195 Vert GEN
2943, 2945 2956, 2958
293 Wright Street, Delavan, WI 53115
Phone: 800-468-7867
Fax: 800-390-5351
www.simerpump.com

Questions and Answers

  • C
    Chad PerezSep 23, 2025
    What to do if Simer Water Pump starts and stops too often?
    • B
      bcampbellSep 23, 2025
      If your Simer Water Pump starts and stops too often, the issue might be: * Backflow of water from piping: Install or replace the check-valve. * A faulty float switch: Replace the float switch.
  • C
    Cynthia WoodsAug 25, 2025
    What to do if Simer 2943 has no voltage at fuse box?
    • J
      joseph76Aug 25, 2025
      If there's no voltage at the fuse box for your Simer Water Pump, the suggested solution is to replace any blown fuses.
  • J
    Jennifer BanksAug 25, 2025
    What to do if Simer Water Pump is stuck or binding?
    • R
      Roberto BridgesAug 26, 2025
      If your Simer Water Pump is stuck or binding: * First, perform all possible above-ground checks. * If necessary, pull the pump. * If the pump is locked, replace it. * Clean the well of all sand or lime before reinstalling the pump.
  • T
    Thomas MccormickAug 27, 2025
    What to do if Simer 2943 Water Pump has wrong size fuse?
    • J
      Justin LewisAug 27, 2025
      If your Simer Water Pump has the wrong size fuse or wrong size time delay fuse, install the correct fuse or time delay fuse.
  • E
    Eric CrawfordAug 27, 2025
    What to do if Simer 2943 starting capacitor is defective?
    • K
      Katherine PetersonAug 27, 2025
      If the starting capacitor in your Simer Water Pump is defective or blown, replace it.
  • B
    Bryan CooperSep 13, 2025
    What to do if Simer Water Pump has no voltage at control box?
    • R
      robertsgregorySep 14, 2025
      To address a situation where there is no voltage at the control box of your Simer Water Pump, rewire the supply to the control box.
  • H
    Hannah RhodesSep 12, 2025
    What to do if Simer 2943 has wrong voltage control box?
    • K
      Kelly WrightSep 12, 2025
      If the control box for your Simer Water Pump has the wrong voltage or horsepower rating, replace the control box if the numbers do not match.
  • K
    kristenchapmanSep 12, 2025
    What to do if Simer 2943 has air volume control not working?
    • K
      kelly42Sep 12, 2025
      If the air volume control is not working in your Simer Water Pump (standard tanks only), replace the control if necessary.
  • J
    Julie SmithSep 4, 2025
    How to fix Simer Water Pump with broken wire in control box?
    • A
      Alyssa GordonSep 4, 2025
      To fix a broken wire in the control box of your Simer Water Pump, disconnect the power and then repair or replace the faulty wire.
  • D
    Daniel EdwardsSep 2, 2025
    What to do if Simer Water Pump has no voltage at pressure switch?
    • L
      Lisa ChristianSep 2, 2025
      If there's no voltage at the pressure switch for your Simer Water Pump, replace the faulty pressure switch.

Simer 2943 Specifications

General IconGeneral
BrandSimer
Model2943
CategoryWater Pump
LanguageEnglish

Related product manuals