12
SD100KIT
Electronic Drum Kit owner’s manual
getting started
Selecting A Voice
Press the [KIT] and [REC/PLAY] buttons simultaneously, then hit a
pad that you want to change the voice for and use the [+] or [-]
buttons to select the voice.
For example: to select a TOM1 voice, press the [KIT] and [REC/
PLAY] buttons. The LED will display the current drum number. Hit
the TOM1 and the LED displays as shown to the right, then the LED
displays TOM1 instrument.
Hit another pad to select and use the [+] or [-] buttons to select the
Voice. You also can press the [CLICK] button to listen to the voice.
Finally press the [REC/PLAY] button to save your settings in the user kit.
Press any other button to exit the menu.
The [CLICK] Button
Click Type
Press [CLICK] button for 2 seconds to enter the metronome type
choice,use [+/-] to select click type: 1/4, 2/4, 3/4, 4/4, 6/4, 3/8,
6/8, 12/8. default: 4/4.
Click Sound
When click is on, press and hold the [CLICK] button and use [+]
or [-] buttons to select the click sound. You have 3 sound options:
001-003.
Click Volume
When click is OFF, press and hold the [CLICK] button and use [+] or
[-] buttons to select click volume, range: 000-032.
To Next Page
Loading...
Need help?
General
