Simmons SD 100 - Getting Started - Recording and Songs; [REC;PLAY] Button Functions

13
www.SimmonsDrums.net
getting started
The [REC/PLAY] Button
Recording
Press and hold the [REC/PLAY] button for 2 seconds. Recording
will start after you hear one bar of metronome hits.
Press [REC/PLAY] button again to stop recording.
Play Back the Recording
Press the [REC/PLAY] button to play back your recording. Press the
[REC/PLAY] button again to stop playback.
The [SONG] Button
The SD100KIT contains 10 preset songs and 1 Demo. Press the
[SONG] and [KIT] buttons simultaneously to start or stop the song.
Drum On/Off
In [SONG] mode, press and hold the [SONG] button for 2 seconds,
LED displays “ON” or “OFF”.
On – turn on the drum track of the song.
Off – turn off the drum track of the song.
Select the songs
Press the [SONG] button, then use [+] or [-]
buttons to select any of the 10 songs.
REC / PLAY KIT SONG
VOICE START
Hold down to
mute drum