5
www.SimmonsDrums.net
PANEL CONTROLS
Top Panel
LED Display
The LED indicates the SONG, PAD or KIT status. When SONG is
selected, the song number appears in the display. When PAD is
selected, the pad name such as Snare, Crash, and Tom, etc. will
appear. Press the KIT button and the drum kit number will be
displayed on the LED.
1
[+] / [–] Value Control Buttons
Use these buttons to navigate through the 10 drum kits, switch
menu selections, or change parameter values.
2
[TEMPO/TAP] Button
Adjusts the tempo of the built-in metronome, the practice songs,
or the song you are recording. You can also set the tempo by
tapping this button repeatedly.
3
LED Display
Takes you to the mode where you are able to change the kit, song
and voice.
4
[CLICK] Button
Turns the metronome on and off at any time. It’s also used to
change the click settings such as time signature and click volume.
5
[REC/PLAY] Button
Gives you the option to record or play back your
own performance.
6
[SONG] Button
Enters the song select display. You can mute the drum part and
adjust the song’s volume. See page 14.
7
[KIT] Button
Enters the kit selection.
8
ON/OFF Button
SONG mode
PAD mode
1
4
2
8
7
3
5 6
KIT mode
To Next Page
Loading...
Need help?
General
