23
ADVANCED OPERATIONS
RECORDING TO A USB DEVICE
1. Press the Record Function Button. A pop up window will appear.
2. Press the front panel Record button to being recording.
3. Press the Play/Stop button to stop recording.
4. Use the previous steps on how to play audio files to play back your
recorded song.
Please Note: Recordings will be mono 32Bit .wav files
Please Note: Recording will begin after 5 sec. You will see the REC
button LED light turn red and then will start blinking to
indicate recording has started
USB TO COMPUTER CONNECTION
The SD2000’s USB to computer connection is used for two different
operations. MIDI communications and Sample transfers..
MIDI
The SD2000 is a USB MIDI class compliant device meaning that
you can plug it into your Windows or Apple computer and it will be
recognized as a MIDI device. This makes it possible to use the SD2000
as a trigger to MIDI device to play sounds on your computer or you
can use the SD2000 module as a drum module from your computer
MIDI software.
To Next Page
Loading...
Need help?
General
