H
helencollierAug 5, 2025
How to put SIMOLIO JH-711 in pairing mode?
- SStacy BrownAug 5, 2025
The first time you turn on your SIMOLIO headphones, the blue LED will flash slowly. After about 8-10 seconds, the red and blue LEDs will flash alternately, indicating pairing mode. Alternatively, press and hold both “Vol+” and “Vol-” buttons simultaneously until the LED flashes red and blue alternately with two “beep” sounds. This restores your SIMOLIO to its default settings, and after turning it on again, it will automatically enter pairing mode.