9 10
ASSEMBLY AND OPERATING INSTRUCTIONS
6
7 8
Attach quick-connect coupling to garden hose (hand tighten only) and connect to inlet adapter.
Attach garden hose to water supply
and turn water on.
Make sure the ON/OFF switch is on the
OFF position.
ASSEMBLY AND OPERATING INSTRUCTIONS
9
10
11
Completely unwind power cord and plug the unit into an outlet.
Depress trigger until there is a steady stream of water.
Press the ON Button.
CAUTION
Drain unit after each use (for
storage): remove water connec-
tion, turn ON the machine for
a few seconds and press gun
trigger to bleed remaining water
in the pump.
Turn OFF immediately.
To Next Page
Loading...
