Simoniz S2000 - How to Use Spray Wand

13 14
OPERATING INSTRUCTIONS
CAUTION
Failuretocleanproperlywillcausethedetergentinjectionsystemtobecome
cloggedandinoperable.
CAUTION
Neveruse:
•Bleach,chlorineproductsandothercorrosivechemicals
•Liquidscontainingsolvents(i.e.,paintthinners,gasoline,oils)
•Tri-sodiumphosphateproducts
•Ammoniaproducts
•Acid-basedproducts
Thesechemicalswillharmtheunitandwilldamagethesurfacebeingcleaned.
CAUTION
Draingunassemblyofanyremainingwater.Aimgundownwardsandsqueezetrigger.
WINTERIZING AND LONG-TERM STORAGE
OptimumWinterizingProcedure
Winterizing your pressure washer will help protect and prolong its life. We strongly
recommend you follow the below steps using Pressure Washer Antifreeze (039-8602-0).
This will keep the internal parts lubricated, protected from rust, and prevents the pump
from freezing.
1. Connect the pump saver hose onto the adaptor and quick-connect coupling.
2. Depress button on top of pump saver container.
3.Continueuntiluidexitsthepressurehose.
4. Remove the hose from pump inlet.
QuickWinterizingProcedure
If you cannot do the Optimum Winterizing
procedure, you can still protect your
pressure washer from winter damage by
doing the below:
1. Disconnect all water connections.
2. Turn on the machine for a few seconds,
until the remaining water in the pump
exits. Turn off immediately.
3. Do not allow high-pressure hose to
become kinked.
4. Store the machine and accessories in
a room that does not reach freezing
temperatures. Do not store near furnace
or other sources of heat as it may dry out
the pump seals.
PUMP SAVER
Recommended: Pressure Washer
Antifreeze (039-8602-0)