DC LINE COMMUNICATIONS REPEATER, 562-346
The DC line communications repeater has a switch package (Sl) that you use to select the repeater’s baud rate.
(See the BMUX CPU board jumper package Sl, Figure 1, to determine the proper baud rate for the
communication channels.) Set the switches on Sl as follows:
BAUD RATE
Sl -1
Sl-2
Sl -3 s1-4
4800
CLOSED OPEN OPEN OPEN
2400
OPEN
CLOSED OPEN OPEN
1200
OPEN OPEN
CLOSED OPEN
300
OPEN
OPEN
OPEN
CLOSED
52
To Next Page
Loading...