Simplex 4005 - Page 32

3-14
When viewing a log, you may also clear that log. To clear a log, press
<Function> to initiate the Clear Log sequence. The display shown in Figure 3-6
appears.
Figure 3-6. Clearing a Log
To clear the log, press <
Enter>. Clearing the Combined Log clears both the
Alarm and Trouble Logs.
Notes:
• The History Logs are automatically cleared on a Cold Start of
the 4005.
• You must be Logged In at a Level 3 or 4 to Clear Logs. If you
do not have access to clear a log, an ‘Insufficient access level’
message is displayed.
The Historical Logs detail system events. The logs are maintained in
chronological order. An illustration of the first Historical Log screen format is
shown in Figure 3-7. An example of a log message is shown in Figure 3-8.
Figure 3-7. Log Display format
• LOG: The log being viewed
A = Alarm
T = Trouble
C =Combined
• NN = Current log entry
• MM = Total number of entries in the log
• Time of Entry = The time/date the event occurred
• Entry Type = The log event
Figure 3-8. Log Display
Continued on next page
Logs, Continued
Clearing Logs
Log Messages
7RFOHDUWKHFXUUHQWORJSUHVV(17(5
7RFDQFHOSUHVV(;,7
/2*1100
7LPHRI(QWU\

(QWU\7\SH
$/2*
DP0RQ
-XO
)LUH$ODUP
One of 34 Alarm Logs
Technical Manuals Online! - http://www.tech-man.com