Simplex 4005 - Logs; Historical Log Types; Viewing and Clearing Logs

3-13
The 4005 has three logs: Alarm, Trouble, and Combined (Alarm & Trouble).
The Alarm log allows 50 entries while saving information about the event and
the time of the event.
Events stored in the Alarm log include:
• Alarms
• Global Alarm Ack
• Log cleared
• Alarm Silence
• System Reset
The Trouble log allows 100 entries while saving information about the event and
the time of the event.
Events stored in the Trouble log include:
• All card and system troubles
• Log-in/out for levels greater than Level 1
• Log cleared
• Supervisory Conditions
• Walk Test (alarm and trouble) - enabled from Walk Test menu
Logs are viewed by selecting the
HISTORY LOG option at the main menu. Press
<Enter> and then use <Previous> and <ó Next> to scroll through the
available logs. The choices are:
Alarm, Trouble, and Combined. The combined
log shows entries in both the Alarm and Trouble logs, ordered by time of event.
Figure 3-5. Viewing History Log
Note: On an empty log condition, a ‘/RJLV(PSW\’ message is
displayed.
Continued on next page
Logs
Historical Logs
Viewing Logs
6<67(0,61250$/
+LVWRU\/RJ>2SWLRQV@
Technical Manuals Online! - http://www.tech-man.com